Is Despoilers Trolls worth it if you’re shopping in Gaming?

Quick answer

If you’re looking to flesh out a low-cost army or test a new unit type without breaking the bank, Despoilers Trolls is a straightforward way to do it.

What you’re actually buying

You’re not just buying a single model; you’re buying a print-ready workflow. At $6, Despoilers Trolls delivers STL files that are already supported and oriented for resin printing. This saves you the tedious, error-prone process of adding supports manually in your slicer, which is often the biggest time sink when printing small, detailed figures. The listing explicitly states the files are intended to be printed with the bases flat to the build plate, meaning you can slice and hit print with minimal fuss.

The pack is also smart about flexibility. While the primary files are fully supported for immediate use, Forest Dragon includes unsupported and unbased versions of the trolls as well. This is a rare courtesy in low-price packs, allowing you to integrate these trolls into larger multi-figure bases or custom dioramas without fighting against pre-baked supports. You get the convenience of a “print now” file and the creative freedom of a raw file, all for the price of a coffee. (Despoilers Trolls)

The scale is specific: 10 mm, which translates to roughly 15–16 mm in real life. This is a common scale for dense infantry units in 28 mm games (where they act as 5mm or 10mm proxies) or for dedicated 10 mm wargames. The listing notes that a Despoiler light infantry figure is shown for scale in the preview images, but that file is not included in this $6 pack. So, if you are building a full Despoilers army, you’ll need to source the other unit types separately, but these trolls fit neatly into that ecosystem. (Despoilers Trolls)

Why it’s on our radar

This pack is interesting because it solves a specific friction point for resin printers: the time cost of support generation. Most indie STL sellers either provide raw, unsupported files (which require hours of manual work) or overcharge for “print-ready” files. Despoilers Trolls sits in the sweet spot, offering pre-supported files at a $6 price point that is low enough to be a no-brainer for testing a new unit.

The inclusion of both supported and unsupported variants is a strong signal of seller competence. It shows Forest Dragon understands that different printers have different build plate sizes and that players have different aesthetic preferences for bases. This dual-file approach adds tangible value that justifies the price, especially when you consider that even a single hour of your time spent adding supports in Chitubox or Lychee Slicer is worth more than $6. (Despoilers Trolls)

What actually matters

Before you buy, confirm that your resin printer can handle 10 mm scale figures comfortably. While 15–16 mm is standard for many printers, very small features on the trolls (like weapons or facial details) might require a printer with good resolution (typically 4K or 5K). If you are running an older 2K printer, you may want to inspect the preview images closely to see if the level of detail matches your machine’s capabilities. (Despoilers Trolls)

Check the license terms carefully. The listing is explicit: this is for personal use only. You cannot sell the STL files, and you cannot sell the physical prints. This is standard for indie sellers, but it’s crucial if you are a hobbyist who occasionally sells custom miniatures or if you run a print shop. If you need commercial rights, this is not the product for you. (Despoilers Trolls)

Finally, verify your slicer compatibility. The files are provided as STLs, which are universal, but the “fully supported” nature means they are optimized for resin slicing software. If you are using a slicer that doesn’t handle pre-supported files well (some FDM slicers, for example, will try to add supports on top of existing supports), you will want to use the unsupported files instead. The fact that both are included means you have a fallback, but it’s worth knowing which file to pick for your workflow. (Despoilers Trolls)

Mid-check

See current options

FAQ

Are these files compatible with FDM (filament) printers? No. The files are specifically designed for resin 3D printing. The supports are oriented for resin build plates, and the 10 mm scale is too small for most FDM printers to print with acceptable detail. If you use FDM, you should skip this product. (Despoilers Trolls)

Do I need to add supports myself? No, if you use the primary files. The listing states the files are “fully supported and are intended to be printed with the bases flat to the build plate.” You can slice and print them directly. However, if you want to customize the bases or print multiple figures on a single plate, you can use the unsupported files and add your own supports. (Despoilers Trolls)

Can I sell the printed trolls? No. The license explicitly states that you are not allowed to sell physical copies of the prints. This is for personal use only. (Despoilers Trolls)

What scale are the trolls? They are 10 mm scale, which measures approximately 15–16 mm in height in real life. This is a common scale for infantry units in 28 mm wargames or for dedicated 10 mm games. (Despoilers Trolls)

Bottom line

If you own a resin printer and are looking to expand your tabletop army with low-cost, print-ready infantry, Despoilers Trolls is a solid, no-frills purchase. The $6 price tag is negligible compared to the time saved on support generation, and the inclusion of both supported and unsupported files gives you the flexibility you need for different printing scenarios. It’s a practical, well-packaged product that respects your time and your budget.