Is February 2021 Knight Characters worth it if you’re shopping in Gaming?
Your resin printer is humming, the vase mode is off, and you still need two or three more figures to make the next battle group feel complete. That gap between “I have a hero” and “I have a squad” is where a $4 drop like this earns its keep. (February 2021 Knight Characters)
February 2021 Knight Characters from Forest Dragon is a $4 resin-printing pack that ships two chivalric figures— a Knight hero and an Enchantress— at 10 mm scale, with pre-supported STLs ready to slice. It is a small, focused addition to a growing knight army rather than a full tabletop starter kit, which is exactly the kind of low-friction upgrade that keeps a print queue moving without a big time investment.
Quick answer
| Best for | Resin printers who want two more 10 mm chivalric figures (Knight hero + Enchantress) with pre-supported STLs, ready to slice. |
| Skip if | You need a full army pack, FDM-only files, or you plan to wait for the completed knight army bundle. |
| Price | $4 |
| Format | 2 × 10 mm STL figures (supported + unsupported versions), resin-print oriented |
| One-line take | A cheap, ready-to-slice pair of 10 mm chivalric figures that rounds out a knight squad without a big project. |
What you’re actually buying
At $4 you are not buying a “pack” in the vague sense; you are buying two specific, print-ready characters that slot straight into a 10 mm chivalric theme. The Knight hero gives you the frontline anchor— the figure you point at when someone asks what the army is about— while the Enchantress adds a second silhouette and a role that most small knight packs leave out. Having both in one drop means you can print a matched pair in a single session instead of hunting two separate listings. (February 2021 Knight Characters)
The files are provided fully supported and are intended to sit flat on the build plate of a resin printer, which is the difference between a file you can slice tonight and one you spend an hour re-supporting in Chitubox. Forest Dragon also includes unsupported versions, so if your slicer handles its own support generation better, you have that path without digging through comments. That dual-file setup is the kind of detail that saves a weekend afternoon when your print queue is already full. (February 2021 Knight Characters)
The scale matters more than it sounds. 10 mm is the sweet spot for dense battle groups: enough detail to read the chivalric styling at arm’s length, small enough that a tray of twenty figures does not eat your resin budget. If you are building a knight army in monthly drops, this pair is the kind of incremental addition that keeps the project moving without a big commitment. (February 2021 Knight Characters)
Why it’s on our radar
This is a temporary product— Forest Dragon is assembling a knight army in monthly drops and plans to bundle all the characters once the set is complete. That makes this $4 pair interesting for two reasons: you can get the Knight hero and Enchantress now without waiting for the full collection, and you can judge the sculpting and support quality on a small purchase before committing to the eventual bundle. For a resin printer who is mid-project and wants to fill a gap this week, the low price and ready-to-slice files make the decision easy. (February 2021 Knight Characters)
The 10 mm chivalric niche is also underserved compared to the flood of 28 mm fantasy packs. If your table is built around smaller-scale armies, finding a sculpted pair that matches that scale without a custom commission is genuinely useful. (February 2021 Knight Characters)
What actually matters
- Resin-only assumption. The files are oriented for resin printing with the bases flat to the build plate. If you are FDM-only, the support structure and 10 mm scale are not going to translate cleanly. Confirm your printer type before checkout on the February 2021 Knight Characters page.
- Pre-supported vs. unsupported. You get both. If you trust the included supports, slice and print. If your slicer does a better job, use the unsupported STLs. Either way you are not locked into one workflow. (February 2021 Knight Characters)
- Scale check. 10 mm is small. If your existing army is 15 mm or 20 mm, these will read as noticeably different. Match the scale to what is already on your table. (February 2021 Knight Characters)
- Temporary status. This is one drop in a series. If you are building the full knight army, decide whether you want these two now or prefer to wait for the completed bundle. The listing notes the eventual all-in-one product, so you are not locked into a fragmented purchase. (February 2021 Knight Characters)
- License scope. Personal use only— no distributing the files, no selling physical copies, and no sharing modified derivatives. Fine for your own table; not a source for a print-on-demand shop. (February 2021 Knight Characters)
Mid-check
If the 10 mm chivalric theme matches your table and you want a Knight hero plus an Enchantress this weekend, the files are ready to slice at the price above. (February 2021 Knight Characters)
FAQ
What scale are the February 2021 Knight Characters? Both figures are 10 mm scale, which is the common small-scale tabletop size for dense battle groups. If your army is 15 mm or larger, these will read as a different size class.
Do the STLs come pre-supported? Yes. The pack includes fully supported files oriented for resin printing with the bases flat to the build plate, plus unsupported versions if you prefer to generate your own supports in your slicer. (February 2021 Knight Characters)
Can I print these on an FDM printer? The files are designed for resin printing. The support structure and 10 mm detail level are optimized for resin, so an FDM print will not be a drop-in substitute. (February 2021 Knight Characters)
Is this a one-time purchase or part of a series? It is a temporary product in a monthly knight army series. Forest Dragon plans to release a bundle containing all the characters once the army is complete, so you can either grab this pair now or wait for the full set. (February 2021 Knight Characters)
Can I sell printed copies of these figures? No. The license covers personal use only. You may modify the files for your own prints, but you cannot distribute the files, share derivatives, or sell physical copies. (February 2021 Knight Characters)
Bottom line
If you are mid-project on a 10 mm chivalric army and need a Knight hero and an Enchantress without a custom commission, this $4 pair is the low-friction way to close the gap. The pre-supported STLs, the dual-file option, and the small price make it an easy “print this weekend” decision. Grab the February 2021 Knight Characters files and get the pair on the tray before the next drop.