Is Goblin Bolt Throwers worth buying right now?
Goblin Bolt Throwers: The $7 resin print that turns your table into a siege
You know that specific gap on your wargaming table where the infantry is covered, but the artillery or heavy siege support is just… vibes? You’ve got the goblins, you’ve got the chaos, but the moment you need a credible bolt-throwing crew to threaten that castle wall, you’re stuck improvising with mismatched miniatures or staring at a blank build plate. That’s exactly the niche Goblin Bolt Throwers from Forest Dragon fills.
For $7, you’re not just buying a single model; you’re buying a complete, ready-to-slice siege unit. These aren’t raw, unsupported meshes that you’ll spend three hours trying to add supports to. Forest Dragon has done the heavy lifting, providing files that are fully supported and optimized for resin printers. If you’re tired of the “print, fail, re-slice, fail again” cycle for a simple skirmish unit, this is the kind of plug-and-play STL file that lets you get back to painting and playing. (Goblin Bolt Throwers)
Quick answer
| Best for | 3D print hobbyists who want a ready-to-slice, fully supported 10mm siege unit without the support-placement headache. |
| Skip if | You print exclusively in FDM (filament), need a large-scale (28mm+) unit, or require a commercial license to sell physical prints. |
| Price | $7 |
| Format | STL files (Fully supported, Unbased, and Base options) |
| One-line take | A rare $7 price point for a complete, pre-supported resin miniature set that saves you hours of slicing time. |
If you’re ready to add some siege warfare to your goblin army, check out the Goblin Bolt Throwers file pack to see the exact mesh quality before you commit.
What you’re actually buying
At $7, this is an incredibly low barrier to entry for a complete miniature unit, but the value here isn’t just in the price—it’s in the state of the files. Most STL files you buy online are “raw,” meaning you have to open them in a slicer, figure out where the supports go, and hope the model doesn’t warp or snap during the print. Forest Dragon flips that script. The Goblin Bolt Throwers STLs are provided fully supported. You slice them, hit print, and you’re done. For a resin printer, that is a massive time-saver.
The pack is also smart about flexibility. You get the crew and the bolt throwers in 10 mm scale, which is perfect for larger-scale wargaming or tabletop dioramas where you want detail without the tiny, fragile 28mm headache. But you’re not locked into one print style. The listing includes a pair of 40 x 20 mm bases with suitable cut-outs, so you can print the crew mounted on bases if you want a ready-to-deploy unit. If you prefer to print them separately and glue them later, or if you want to integrate them into a larger terrain piece, the unbased and unsupported versions are included as well. (Goblin Bolt Throwers)
This is a “job-to-be-done” purchase. You need a goblin siege unit. You don’t want to model one from scratch, and you don’t want to spend an evening fighting with support structures. You want a file that works. This pack delivers exactly that, with a clean, personal-use license that lets you modify the files for your own table if you need to tweak a pose or add a bit of weathering detail. (Goblin Bolt Throwers)
Why it’s on our radar
This product stands out because it solves a very specific friction point in the 3D printing hobby: the time cost of support placement. In the 10mm scale niche, you often get raw files or files that are only partially supported. Finding a $7 pack that includes fully supported files, bases, and unbased versions is a rare value proposition. It’s not just a model; it’s a workflow shortcut. (Goblin Bolt Throwers)
The specificity of the offer is also what makes it interesting. It’s not a “goblin pack” with 50 different pieces you might not need. It’s a bolt-throwing crew. That’s a clear job. If you’re building a goblin army for a fantasy wargame, you need siege support. This gives you that support without the modeling time. The fact that it’s from Forest Dragon, a seller focused on this specific type of ready-to-print content, adds a layer of trust that you’re getting a file that has been tested and prepared for the printer, not just exported from a sculpting app. (Goblin Bolt Throwers)
What actually matters
Before you hit the buy button, keep these three checks in mind to make sure this is the right fit for your printer and your table: (Goblin Bolt Throwers)
- Resin Only: The listing explicitly states these are intended for resin 3D printers. The detail level and the support structure are designed for the precision of resin, not the layer heights of FDM (filament) printers. If you only have a filament printer, this file will likely not print well or at all. (Goblin Bolt Throwers)
- Scale Check: The models are 10 mm scale. This is a mid-to-large scale for miniatures. If your wargame uses 28mm infantry, these will be significantly larger. Make sure they match the scale of your existing army or diorama. If you’re building a 10mm or 15mm scale force, you’re in the right place. (Goblin Bolt Throwers)
- Personal Use License: The license is strict. You can modify the files for your own use, but you cannot sell physical copies, distribute the files, or upload them to AI systems. If you’re looking for a commercial product to sell to other hobbyists, this is not the right file. It’s for your table, not your shop. (Goblin Bolt Throwers)
If those three points align with your setup, the Goblin Bolt Throwers listing is a straightforward, low-risk purchase for a high-impact addition to your collection.
Mid-check
If you’ve got a resin printer and a need for goblin siege support, this is a no-brainer at $7. The pre-supported files alone are worth the price of admission. (Goblin Bolt Throwers)
FAQ
Can I print these on a filament (FDM) printer? No. The listing specifies that the crew is intended to be printed on a resin 3D printer. The support structures and level of detail are optimized for resin’s precision. Printing these on a filament printer will likely result in poor quality or failed prints. (Goblin Bolt Throwers)
Do the files come with supports already applied? Yes. This is the key selling point of the Goblin Bolt Throwers pack. The files are provided fully supported, meaning you can slice and print them without having to manually place supports in your slicer software. This saves you significant time and reduces the risk of print failure.
What scale are the models? The models are in 10 mm scale. This is a common scale for larger tabletop wargames and dioramas. Make sure this matches the scale of your existing miniatures before purchasing. (Goblin Bolt Throwers)
Can I sell the physical prints I make from these files? No. The license is for personal use only. You are not allowed to sell physical copies of the models or distribute the STL files to others. You can, however, modify the files for your own personal use. (Goblin Bolt Throwers)
Are bases included? Yes. The pack includes a pair of 40 x 20 mm bases with suitable cut-outs for the crew. You can print the models with bases or separately, as both based and unbased versions are included. (Goblin Bolt Throwers)
Bottom line
If you’re a resin printer looking to add a credible, ready-to-slice siege unit to your goblin army, Goblin Bolt Throwers is a sharp, efficient purchase. You get a complete crew, bases, and the most valuable feature in the STL world: pre-supported files that let you skip the slicing headache. For $7, it’s one of the easiest “yes” decisions you’ll make this week.