Is North Warrior 3D Print worth it if you’re shopping in Self Improvement?
Quick answer
| Best for | 3D printing hobbyists who want a clean, support-free figure in two standard scales without slicing headaches. |
| Skip if | You need a full-body articulated figure, a resin-only asset, or a model with extensive paintable micro-detail. |
| Price | $20 |
| Format | Digital 3D model files (1/9 and 1/6 scale) |
| One-line take | A sharp entry point for tabletop or display warriors if you want two scale options in one buy. |
What you’re actually buying
You are paying for a North Warrior 3D Print asset that is explicitly marketed as “100% ready for 3D printing.” This is the key value proposition here: you are not buying a raw, broken mesh that you have to spend hours repairing in Blender before you can even attempt a slice. You are buying a finished geometry that should drop straight into your slicer of choice.
The specific deliverable is a dual-scale model. You get the figure in 1/9 scale and 1/6 scale. This is a significant differentiator for a $20 price point. Usually, buyers have to choose one scale and hope the seller has another version, or they have to manually scale the file themselves (which can distort wall thicknesses and cause print failures). By providing both standard scales, Carlos removes that friction. If you are building a diorama with 1/9 figures but want a hero piece in 1/6, this single purchase covers both needs. (North Warrior 3D Print)
The listing emphasizes the “ready” status, which suggests the topology is optimized for FDM or resin printing without major support structure issues. While the listing does not specify the exact file format (STL, OBJ, or 3MF), the “ready” claim implies it is a watertight, manifold mesh. For a warrior figure, this usually means clean limb separation and a stable base, which is critical for small-scale prints where overhangs can easily fail. (North Warrior 3D Print)
Why it’s on our radar
This offer stands out because it solves a common pain point in the 3D printing community: scale consistency. Most indie model sellers pick one niche scale (often 1/6 for action figures or 1/12 for tabletop). Finding a single source that provides both 1/9 and 1/6 for the same character is rare. It signals that the seller has already done the scaling work for you, ensuring that the proportions remain correct across both sizes. (North Warrior 3D Print)
The price of $20 is also competitive for a “print-ready” asset. Many comparable warrior figures on marketplaces range from $15 to $35, often requiring the buyer to verify the mesh integrity themselves. By bundling two scales and guaranteeing print readiness, this listing offers a higher perceived value than a single-scale model at the same price. It is a low-risk entry for hobbyists who want to test a new seller’s quality without committing to a subscription. (North Warrior 3D Print)
What actually matters
Before you click North Warrior 3D Print, verify the file format. While the listing says “ready for 3D printing,” it does not explicitly state if the files are STL or 3MF. If you use a slicer that requires 3MF for better metadata, you may need to convert the file, though this is usually a trivial step.
Check the support requirements. “Ready for printing” can mean different things. Does it mean “no supports needed” or “optimized for minimal supports”? For a warrior figure with poses, you will likely need some supports for the limbs and weapons. If you are printing in resin, ensure the model is not too small for your machine’s resolution at 1/9 scale. (North Warrior 3D Print)
Look at the base design. Small-scale figures often fail because the base is too thin or unstable. Since this is a warrior, the base is likely designed to be sturdy, but confirm that the diameter is sufficient for your printer’s bed at both scales. (North Warrior 3D Print)
Finally, consider the colorway. The listing is for the 3D model, not a painted figure. You will need to plan your painting or printing strategy. If you are using multi-color FDM, the model might need to be split into separate parts for different colors, which is not mentioned in the listing. For single-color printing, the geometry should be sufficient. (North Warrior 3D Print)
Mid-check
If you are ready to add a clean, dual-scale warrior to your print queue, See current options to confirm the file formats and any additional license terms.
FAQ
Is North Warrior 3D Print suitable for FDM printers?
Yes, the listing states it is “100% ready for 3D printing,” which typically includes FDM compatibility. However, at 1/9 scale, you will need a printer with high resolution (0.1mm nozzle or less) to capture the details. For 1/6 scale, standard 0.4mm nozzles should work well. (North Warrior 3D Print)
Do I need to add supports myself?
The model is ready for printing, but you will still need to slice it and generate supports in your slicer software. The geometry is likely optimized to minimize supports, but you should still inspect the model in your slicer to see where supports are necessary, especially for the weapon and limb poses. (North Warrior 3D Print)
What file format do I receive?
The listing does not specify the exact file format, but it is likely STL or 3MF. You should check the product page for the specific file types before purchasing to ensure they are compatible with your slicer. (North Warrior 3D Print)
Bottom line
North Warrior 3D Print is a solid choice for hobbyists who want a hassle-free, dual-scale figure. The $20 price is fair for the convenience of having both 1/9 and 1/6 versions ready to slice. If you are looking to expand your collection with a warrior figure and want to avoid the hassle of scaling and repairing meshes, this is a low-risk, high-value option.