November 2021 Despoiler Lord on Mount: is this $4 stack worth it for Gaming?
If your resin printer is sitting idle and you are hunting for a high-impact centerpiece for your miniatures table, the gap between “just another generic knight” and a truly distinct character often comes down to the mount. That is the exact problem November 2021 Despoiler Lord on Mount solves. At just $4, Forest Dragon offers a 10mm scale figure that is ready to slice and print, removing the tedious hours of manual support placement that usually kill a weekend project. It is a specific, pre-supported asset for hobbyists who want a unique army piece without the modeling overhead.
Quick answer
| Best for | Resin 3D printing enthusiasts building a Despoilers army or looking for a distinct 10mm scale mounted lord. |
| Skip if | You only print in FDM (this is resin-specific), or you are waiting for the full character pack to release. |
| Price | $4 |
| Format | Pre-supported STL files (19.1 MB) + unsupported version |
| One-line take | A low-cost, print-ready 10mm figure that saves you the hassle of generating supports for a complex mount. |
What you’re actually buying
For a quarter of a coffee, you are getting a complete, production-ready STL package that respects your time. The core deliverable is a 10mm scale Despoiler Lord on a mount, provided in a fully supported state. This is the critical value proposition: the seller has already done the heavy lifting of placing supports on the resin model, meaning you can slice the file and hit print immediately. You are not buying a raw mesh that requires hours of manual support generation in Chitubox or Lychee; you are buying a finished print file. (November 2021 Despoiler Lord on Mount)
The package also includes an unsupported version of the figure without a base, giving you flexibility if you want to swap the mount or use the character in a different configuration. The file size is a modest 19.1 MB, which is typical for a high-detail 10mm figure and ensures a quick download. This is a pure utility purchase: you pay for the labor of support placement and the specific design of the Despoiler Lord, not for a generic template. If you are building a cohesive army, the Despoiler Lord mount file fits into a larger ecosystem of units from Forest Dragon, making it a strategic addition rather than a one-off print.
Why it’s on our radar
This specific offer stands out because it targets a niche pain point in the miniature 3D printing community: the time cost of support generation. Many sellers provide raw STLs, forcing the buyer to spend more time configuring the print than actually printing it. By providing a “fully supported” file intended to be printed with the bases flat to the build plate, Forest Dragon removes that friction entirely. It is a smart, low-barrier entry point for anyone who wants to test the waters of 10mm scale printing or expand a specific army theme without committing to a massive library purchase. The price point is so low that the risk of a failed print or a design you don’t love is negligible, making it an easy “yes” for hobbyists with a resin printer. (November 2021 Despoiler Lord on Mount)
What actually matters
Before you click buy, check your printer’s build plate size and your preferred scale. This is a 10mm scale figure, which is significantly smaller than the standard 28mm or 32mm miniatures. If your army is already built in 28mm, this will not match. Verify that your resin printer can handle the detail level at 10mm; while the file is pre-supported, the fine details of the mount and character may require a high-resolution print setting to look right. Also, note the licensing: you can modify the files for personal use, but you cannot share derivatives or sell physical copies. If you are looking to create a custom variant for a friend, that is fine, but you can’t upload the modified STL to a sharing site. Finally, the listing notes that a character pack will be available once the Despoilers army is completed, so if you are waiting for a bulk discount, you might want to hold off until then. (November 2021 Despoiler Lord on Mount)
Mid-check
If you have a resin printer and you are ready to add a distinct mounted unit to your collection, this is the move. (November 2021 Despoiler Lord on Mount)
FAQ
Is this file compatible with FDM printers? No, the listing specifies that the files are intended for resin 3D printers. The pre-supports are designed for the flat build plate of a resin machine, and the detail level at 10mm is generally too fine for standard FDM resolution. (November 2021 Despoiler Lord on Mount)
Can I use this for my own army? Yes, the license allows personal use. You can print the figure and use it in your own games or collections. You are not allowed to distribute the files or sell physical copies of the print. (November 2021 Despoiler Lord on Mount)
Do I need to add supports myself? No, the main file is provided fully supported. You can slice it as is. An unsupported version is also included if you prefer to generate your own supports or use a different base. (November 2021 Despoiler Lord on Mount)
Bottom line
If you are a resin printer owner looking for a quick, high-impact addition to your miniatures collection, November 2021 Despoiler Lord on Mount is a no-brainer at $4. You get a pre-supported, print-ready 10mm figure that saves you hours of configuration time. It is a specific, well-defined asset that fits perfectly into the Despoilers army theme, and the low price makes it an easy test for anyone new to 10mm scale printing. Grab the file, slice it, and get your print bed ready.