Is Red Sonja STL for 3D Printing worth buying right now?
Lead
You have the resin printer. You have the slicer open. But finding a figure that is actually ready to go on the build plate—without you spending three hours manually placing supports or praying the keying lines up—can be frustrating. Red Sonja STL for 3D Printing from NYMPHA 3D is a $30 package designed to skip that setup phase. It is a 1:6 scale sculpture (381mm tall) that arrives with pre-supported parts, clean splits, and precise keying, meaning you download, extract, and print. If you are tired of “raw” STLs that require heavy post-processing or fail on the first try, this pre-supported Red Sonja model is a specific solution for resin printers who want a reliable, paintable figure without the technical headache.
Quick answer
| Best for | Resin printer owners who want a 1:6 scale figure that is already split, keyed, and supported. |
| Skip if | You need FDM printing, want a bust/alternative attire (premium tier), or do not have WinRAR to extract the files. |
| Price | $30 |
| Format | RAR archive containing STL and LYS files (24 parts, pre-supported and unsupported). |
| One-line take | A test-printed, resin-optimized figure that saves you hours of slicer setup. |
What you’re actually buying
At $30, you are not just buying a mesh file; you are buying the post-processing labor that usually eats up a weekend. The listing explicitly states the model is “thoroughly test printed for reliability,” which is the single most important metric for resin printing. A file that looks good on a render but fails on the plate is worthless, but this test-printed Red Sonja STL comes with the confidence that the geometry holds up under the cure light.
The package includes both pre-supported and unsupported parts. This is a rare and valuable inclusion. Most sellers force you to choose: either you get a file with supports you have to remove (painful for intricate details like hair or armor), or you get a file with no supports (risky for overhangs). Here, you get both. You can print the pre-supported version for maximum success rate, or use the unsupported version if you want to tweak supports in your slicer. The files are provided in both .stl and .lys (Lychee/Slic3r) formats, covering the major resin slicing ecosystems. (Red Sonja STL for 3D Printing)
The figure is scaled at 1:6 and stands 381mm (approx. 15 inches) tall. That is a substantial shelf presence, not a tiny diorama piece. It is split into 24 parts, which is a manageable number for a figure of this complexity—enough to allow for clean paint lines and easy removal from the build plate, but not so many that you are hunting for tiny keys. The “clean splits and precise keying” mentioned in the description means the parts will fit together tightly, reducing the need for heavy filler or glue during assembly. (Red Sonja STL for 3D Printing)
Note that this is a STL-only product. There are no textures, materials, or renders included. You are buying the geometry. If you are looking for a digital asset for a game engine or a 3D render, this is not the right file. But if you are looking for a physical object to paint and display, the Red Sonja print files are optimized specifically for that workflow.
Why it’s on our radar
This listing stands out because it addresses the “last mile” problem of 3D printing. Many indie sellers provide high-quality sculpting but leave the printing optimization to the buyer. NYMPHA 3D, working with sculptor Lutidei, has done the heavy lifting: the supports are placed, the splits are clean, and the file is verified. For a resin printer, the difference between a “raw” STL and a “ready-to-print” STL is the difference between a 10-minute job and a 4-hour troubleshooting session. (Red Sonja STL for 3D Printing)
The inclusion of Lutidei’s sculpting adds a layer of artistic quality that generic fan-made models often lack. The figure is designed to be “enjoyable to paint,” which suggests the surface details and part separations are thought out for the painter, not just the printer. If you are a beginner, the pre-supported files lower the barrier to entry significantly. If you are an experienced painter, the clean splits mean you won’t be fighting the geometry to get a clean finish. The NYMPHA 3D Red Sonja package is a practical choice for anyone who wants a high-impact figure without the technical risk.
What actually matters
Before you hit buy, check these three specifics to ensure this fits your setup: (Red Sonja STL for 3D Printing)
- Printer Bed Size: The figure is 381mm tall and 259mm wide. If you are printing the full figure in one go (which is unlikely given the 24 parts, but possible for the main body), ensure your build plate can accommodate the largest part. Most 10-inch and 12-inch resin printers will handle the individual parts easily, but check your specific machine’s max build volume if you plan to print large sections. (Red Sonja STL for 3D Printing)
- File Extraction: The files are in a RAR archive. If you do not have WinRAR or a compatible extraction tool (like 7-Zip), you will need to install one before you can access the STLs. This is a minor friction point, but it is worth noting if you are on a device where you cannot easily install new software. (Red Sonja STL for 3D Printing)
- Resin vs. FDM: This is strictly for resin printing. The level of detail, the thin parts, and the pre-supported structure are not suitable for FDM (filament) printers. If you only have a FDM printer, this product will not work for you. (Red Sonja STL for 3D Printing)
If you are a resin printer looking for a figure that respects your time and your paintbrush, the Red Sonja STL download is a solid investment.
Mid-check
If you have a resin printer and want a 1:6 scale figure that is already supported and split, this is the package to look at. (Red Sonja STL for 3D Printing)
FAQ
Is this model supported for FDM printing? No. The listing explicitly states it is “carefully designed for resin printing.” The geometry, part splits, and support structure are optimized for resin cure and removal, not filament extrusion. (Red Sonja STL for 3D Printing)
Do I need to add my own supports? No, but you have the option. The package includes pre-supported parts as well as unsupported parts. You can print the pre-supported files directly for a guaranteed successful print, or use the unsupported files if you prefer to place your own supports in your slicer. (Red Sonja STL for 3D Printing)
What scale is the figure? The figure is 1:6 scale, standing 381mm (approx. 15 inches) tall. This is a large, shelf-dominating figure, not a small diorama piece. (Red Sonja STL for 3D Printing)
Are there other versions available? Yes. The listing mentions Bust and Alternative attire as premium versions. The $30 price covers the standard full-body figure. If you want the bust or alternate outfit, you would need to check for those specific premium tiers. (Red Sonja STL for 3D Printing)
What file formats are included? You receive STL and LYS files. This covers most major resin slicing software. The files are delivered in a RAR archive. (Red Sonja STL for 3D Printing)
Bottom line
If you are a resin printer who is tired of spending more time on support placement and part splitting than you do on painting, Red Sonja STL for 3D Printing is a smart buy. At $30, you get a test-printed, artist-sculpted figure that is ready to go on the plate. The inclusion of both supported and unsupported files, along with clean keying and a manageable 24-part count, makes this a low-risk, high-reward project. Whether you are a beginner looking for a reliable first big print or an experienced painter wanting a detailed figure, the Red Sonja print package delivers exactly what it promises: a figure that prints well and paints beautifully.