Is Wicked Collection: Weapons and deco vol. 1 worth it if you’re shopping in Comics & Graphic Novels?
Seven Deadpool and Guardians props, three print states, one $20 pack
You’ve probably got a shelf of half-finished 3D prints: a blade that cracked at the hilt, a bust that needed six hours of sanding, or a logo base that warped on the first layer. The gap between “I want this on my desk” and “I actually have it” is usually support removal, failed first layers, and files that need a second pass in a slicer before they’re even worth printing. (Wicked Collection: Weapons and deco vol. 1)
Wicked Collection: Weapons and deco vol. 1 is a $20 pack from Wicked that skips that friction. It ships 17 Marvel-themed props — Deadpool guns, a Gamora blade, a Starlord mask, ninja stars, a Uzi, and more — in three states: non-supported, presupported, and one-piece. That means you can pick your printer’s sweet spot and hit print without rebuilding supports or praying the geometry holds. If you’re decorating a comic-themed workspace and want props that look finished the moment they come off the bed, this is the kind of pack that earns its shelf space.
Quick answer
| Best for | FDM or resin printers who want ready-to-print Marvel props with no support rebuilding |
| Skip if | You need wearable helmets, full character busts, or non-Marvel themes |
| Price | $20 |
| Format | 17 props in non-supported, presupported, and one-piece variants |
| One-line take | A dense, print-ready Marvel prop pack that removes the slicer work before you start |
What you’re actually buying
At $20 you’re not getting a single hero bust. You’re getting a full prop library that covers the Guardians of the Galaxy and Deadpool universes in one download. The pack includes the Deadpool Gun 01 and 02, a Deadpool Katana with its holder, a Gamora Blade and Switchblade, a Knives set, a Sai, a Ninja Star, and a Uzi — plus the Starlord Blaster and the Starlord Mask (listed as decoration only, not wearable). That’s eight weapons and blades alone, each sized differently so you can mix scale on a shelf without everything looking like the same object. (Wicked Collection: Weapons and deco vol. 1)
The second half of the pack is where the decoration angle lands. You get the Deadpool Logo, a Gamora Logo, a Guardians of the Galaxy Badge, a Pony Badge, a Logo Deadpool Bust, a Logo Gamora Bust, and a Logo Guardians Diorama base. These aren’t just flat logos; the busts and diorama base give you vertical elements to anchor a display. Pair the Uzi with the Guardians diorama base and you’ve got a scene, not just a pile of plastic. (Wicked Collection: Weapons and deco vol. 1)
The real value is in the three print states. Every prop ships non-supported, presupported, and one-piece. If you’re running a resin printer, the presupported files save you the slicer time. If you’re on FDM and want a clean surface, the non-supported versions let you add your own supports where you want them. And the one-piece variants are the fast path: no supports at all, just a single continuous print. For a $20 pack, getting three optimized versions of 17 different props is more than most single-file prints cost. (Wicked Collection: Weapons and deco vol. 1)
Why it’s on our radar
Most 3D print packs for comic fans ship one file per model and leave the support work to you. Wicked’s approach is the opposite: they pre-solve the printability problem so your only job is choosing which prop to run next. The mix of weapons, logos, busts, and a diorama base also means you’re not locked into one aesthetic — you can build a Deadpool-heavy shelf or a Guardians display or a mixed “comics desk” without buying three separate packs. (Wicked Collection: Weapons and deco vol. 1)
The specificity of the listing matters here too. Each prop is named, sized, and categorized clearly, so you know exactly what you’re getting before you hit print. The Starlord Mask is explicitly marked as decoration-only, which saves you from the disappointment of a helmet that doesn’t fit over your head. That kind of honest scoping is rare in a $20 bundle and tells you the seller actually tested these for their intended use. (Wicked Collection: Weapons and deco vol. 1)
What actually matters
Before you commit, check the file formats against your printer. The pack is designed for both FDM and resin, but the one-piece and presupported variants will behave differently depending on your tech. If you’re on a resin printer, the presupported files are your fast path; if you’re on FDM, the non-supported versions give you more control over support placement. (Wicked Collection: Weapons and deco vol. 1)
Also confirm the scale. The listing notes that each prop has a different size, so take a close look at the dimensions before you start printing. A Ninja Star and a Deadpool Katana aren’t going to sit at the same height on a shelf, and the diorama base is likely the largest element in the pack. If you’re building a specific display, sketch out the layout first so you’re not surprised by a prop that’s bigger or smaller than you expected. (Wicked Collection: Weapons and deco vol. 1)
Finally, note the Patreon mention in the listing. Wicked offers six highly detailed Marvel Comics 3D Sculptures and Busts per month on Patreon, which means this pack is volume one of an ongoing series. If you’re already invested in the aesthetic, the $20 entry point is a low-risk way to test whether their print quality and design style match what you want before you subscribe to the monthly feed. (Wicked Collection: Weapons and deco vol. 1)
Mid-check
If the prop mix matches what you’re trying to build, See current options to confirm the file formats and pricing before you check out.
FAQ
Is Wicked Collection: Weapons and deco vol. 1 suitable for FDM printers?
Yes. The pack ships non-supported, presupported, and one-piece variants for each of the 17 props, so you can choose the file that matches your FDM printer’s capabilities. The non-supported files give you full control over support placement, while the one-piece variants let you skip supports entirely. (Wicked Collection: Weapons and deco vol. 1)
Can I print the Starlord Mask as a wearable helmet?
No. The listing explicitly marks the Starlord Mask as decoration-only, not wearable. It’s designed to sit on a shelf or diorama base, not to fit over your head. If you need a wearable helmet, this pack won’t cover that use case. (Wicked Collection: Weapons and deco vol. 1)
How many props are included in the $20 pack?
You get 17 distinct props, each available in three print states (non-supported, presupported, and one-piece). The props include weapons like the Deadpool Gun, Gamora Blade, Uzi, and Ninja Star, plus logos, busts, badges, and a diorama base for the Guardians of the Galaxy theme. (Wicked Collection: Weapons and deco vol. 1)
Is this a one-time purchase or a subscription?
This is a one-time $20 purchase for the volume one pack. Wicked also runs a Patreon that offers six new Marvel Comics 3D Sculptures and Busts per month, but the pack itself is a standalone download with no recurring cost. (Wicked Collection: Weapons and deco vol. 1)
Bottom line
If you’re decorating a comic-themed workspace and want props that print clean without a second pass in the slicer, Wicked Collection: Weapons and deco vol. 1 is a sharp $20 entry point. You get 17 Marvel-themed props in three print states, a mix of weapons and display elements, and honest scoping on what each file is designed to do. Hit print, pick your favorite prop, and skip the support-rebuilding step that usually kills a weekend project.